Clan Saber Series 2 Crystal Chamber Chassis [Digital file]

This is a set of 3D files for home printing of the chassis to install one of the Clan Saber Series 2 (Shaak Ti only).

Printing Recommendations:

• Print it in a vertical position with supports only on the curved section at the bottom (from the outside), as some printers do not handle that small curve well.
• I recommend a minimum infill of 25% to give it a good weight.
• PLA or PETG work well.
• Maximum layer height of 0.2 mm.
• Minimum of 3 walls, 3 floors, and 3 ceilings.

For the Kyber crystal it's recommended you resin print this at a layer height of 0.05mm, using transparent resin.

NOTE: By making this purchase, you agree that they are for personal use only. You are not authorized to sell 3D prints of these files.